KAL-FIRE Fairo-Hybrid ECO-line 75 Bedienungsanleitung Seite 68

Error Cause
code
Lack of ionisation
detection during
Lack of ionisation
detection during
08A
If the error code still displays, contact your
installer. The ionisation cable may be damaged or
improperly connected to the ionisation rod.
Solution
If no flame is visible during ignition, but a spark
appears at the ignition rod (the V symbol on the
burner in the fire):
ignition The gas pressure in your home is insufficient or the
gas valve is defective. In either case, contact your
installer.
If no flame is visible during ignition, and no spark
appears at the ignition rod (the V symbol on the
burner in the fire):
ignition
•
Check the fire to ensure that there is
no contact between the ignition rod
(the V symbol in the burner) and the
other elements.
68