Error
Cause
code
Incorrect
15A
ionisation signal
Lack of ionisation
detection during
08A
light continues to flash, resynchronise the remote
control and the technical unit (see error code
'NOLK').
Solution
Contact your installer.
If a flame is visible during ignition:
•
•
ignition
Check that there is no contact between the
ionisation rod (the || symbol on the burner)
and the Kal-Glow or the furnishings in the fire.
Check that the cable is correctly plugged into
the technical unit (see 'ionisation' in section
20: Wiring diagram).
67