KAL-FIRE Fairo-Hybrid ECO-line 75 Bedienungsanleitung Seite 48

11.1 Fairo ECO-line: three safety measures
1. An electronic flame ionisation detector detects the presence of flames.
If the Fairo ECO-line does not detect a flame, the delivery of gas is cut off for 1 minute.
Following that, the fire will attempt to reignite automatically. If the fire must be switched
off immediately and should not be relit, hold down the / button on the remote control for
around 10 seconds. This 'emergency stop' definitively cancels the heat-controlling device,
pre-empting automatic reignition.
2. 24-hour safety
After 3 consecutive automatic ignition attempts without any flame being detected, the
system will be blocked (code A08). In this case, it is possible to use the remote control to
try to unblock the fire a further 2 times (see section 15.2) before the system is locked for
24 hours (lock-out code F08). If this occurs, the Fairo ECO-line cannot be used for 24 hours,
a feature designed to ensure user safety.
48