Philips LED DayLight 4 Bedienungsanleitung Seite 3

2
Content of the Philips LED DayLight 4 kit
3 m
2 m
2x
1x
4x 4x
3
Where to install Philips LED DayLight 4
max
Philips
1500 mm
min 600 mm
Legal installation position
ECE regulation 48
Make sure that the installation position of the
Philips LED DayLight 4 modules conforms to
the diagram above.
2
1x
1x
min
250 mm
10° max 10° max
Horizontal tilting regulation
In order to follow the shape of the vehicle,
Philips LED DayLight 4 optics have been
especially designed to insure full conformity
with the 10° (max) horizontal tilting angle
regulation.
4
How to install Philips LED DayLight 4 on your car
How to install the LED modules using clip-on brackets
2
1
10x
Insert LED DayLight 4
module into the bracket
only after it is mounted
on the car!
Useful information for LED DayLight 4 customized installation
Ø M5
You may use the M5 tapped holes
inside the module's body for any
other type of mounting.
1
2
3 4
1
1 Installation on horizontal surface 2
Depending on your car model, the
m
5 m
customized installation may be
2 3 .
performed:
- with or without using the clip-on
brackets
m
. 5 m - with or without cutting out
1 2 0
the surface.
Space required for LED
module installation
Make sure you have the above
space available to install each
module.
If necessary, cut out to
exact size (see above).
2
3
Installation on vertical surface
3