Salamander Designs FPS1XL Montageanleitung Seite 7

Atach Display to Stand
Using four (I) screws, attach four Keyhole Shoulder Washers (J) as shown.
Attach screws to Display Header
Loosely attach four "D" screws to Display Header in the locations shown below left. Leave approximately 1/4"
space between the screw head and the Display Header surface as shown below right.
Using six "H" Button head Screws, attach the Display Beam to the Display Bracket.
H x 6
Salamander Designs - XL Fixed Height Mobile Display Stands
Using four 5/16 - 18 x 3/4 Button Head Screws, attach
four Keyhole Shoulder Washers as shown.
I x 4
1/4"
I
J x 4
501-692 [4.20] page 7 of 21