Vitek VT-2130 Benutzerhandbuch Seite 8

•
Set the necessary room temperature us-
ing the buttons (31) «+» «-».
•
To switch on rotation press the (33) but-
ton, press the button (33) again to switch
off rotation.
•
You can select the timer operation time us-
ing the (34) button on the remote control
or the (17) button on the control panel.
•
Press the (32) button to switch on humidi-
fying function.
•
To switch on the fan heater press the (36)
button on the remote control, set the but-
ton (7) to the "0" position, and then take
the plug out of the
AUTOMATIC SWITCHING OFF FUNCTION
The fan heater is equipped with auto switching
off function when overheated.
•
If the unit starts overheating, automatic
thermal switch will be on, the fan heater will
switch off.
•
In this case immediately take the plug out
of the socket.
•
Make sure that the rear and the front grids are
unrestricted and nothing prevents air flow.
•
Let the fan heater to cool off for about 10-
15 minutes before switching it on again.
•
Plug the appliance, switch it on and set
power and room temperature again.
•
The unit will not switch on if the water tank
and the tray are not installed.
•
If the unit does not switch on it may mean
that there are damages. In this case contact
an authorized service center for repair.
CLEANING AND CARE
•
Unplug and take the plug out of the socket
before cleaning.
•
Wipe the unit case with a dry cloth.
•
Do not use solvents or abrasive substances
for cleaning.
•
Do not immerse the fan heater in water or
any other liquids. Provide that liquid does
2130 Instr.indd 7 2130 Instr.indd 7
socket.
not get into the fan heater case in order not
to damage it or avoid electric shock.
•
To clean air inlets on the rear of the fan
heater use the vacuum cleaner with the
corresponding attachment.
•
After cleaning put the fan heater in the box
and keep in a dry
•
Provide that the cord does not touch sharp
objects.
•
Before using the fan heater for the next
time check its functionality and isolation of
the cord.
ATTENTION! Portable electrical fan heaters
are intended for additional room heating. They
are not meant for operation as main heating
devices.
Specifications
Power supply: 220-240 V, ~ 50 Hz
Power: 1800W
The manufacturer preserves the right to
change specifications of the unit without pre-
liminary notification.
Service life of the appliance is not less than
5 years
GUARANTEE
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim un-
der the terms of this guarantee.
This product conforms to the EMC-Require-
ments as laid down by the Council Directive
89/336/EEC and to the Law Voltage Regulation
(73/23 EEC)
7
ENGLISH
place.
18.07.2011 10:21:10 18.07.2011 10:21:10