Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
SETUP
To set up the remote, firstly please download the My
Nevo app. This app communicates with the remote using
Bluetooth Low Energy or BLE. You can get this app by
scanning the QR code below, or by searching for "My Nevo"
in the App or Play Store.
www.oneforall.com/mynevo
When you first use the app, it may
take up to 30 seconds to connect
to your remote. This is a one time
check to see the firmware of the
remote is up to date.
iOS version of setup app requires iPhone 8 or newer or
second-generation SE. First generation SE and iPhone
7 and older are not supported..
DEVICE SETUP
Once the app has located your remote, you can follow the
instructions to set it up to control your Audio Video devices
– we recommend setting up your TV first of all.
You can then add other devices such as set top boxes and
sound bars. You can set up one TV, and up to 5 other devices
that you use as source of your viewing content, for example
a streaming box, satellite or cable and a Blu-ray player.
When you set these up, the remote will also do a quick test
to see which HDMI Input of your TV your source devices are
connected to.
AMAZON FIRE STICK / CUBE SETUP
If you have an Amazon Fire Edition Television, this can be
setup as a normal TV. However if you have an Amazon Fire
Stick or Cube, the procedure is slightly different. You will
need the original Fire remote control. Next perform the
following 5 steps:
1.
First, simply turn on your TV and select the
input you have the Fire device connected to.
2.
Secondly, press any button on the original
Fire remote to wake it up.
4
Werbung
