Cameo MOVO Z100 Bedienungsanleitung Seite 8

Strobe
Red
Green
Blue
White
Zoom
Ring Macro
Ring Macro Speed
DEVICE SETTINGS (Setting)
Press MODE to access the system settings selection menu. Use UP and DOWN to select the menu item "Setting" (shaded in colour) and
confirm with ENTER. This will take you to the sub-menu for configuring the sub-menu items (see list, select using UP and DOWN, confirm
with ENTER). The main display is activated automatically after approximately 30 seconds of no input.
DMX 36 Ch DMX 36 Ch
ADDRESS 001 Display Rev
MODE xxx I
Setting I
System Info I
Reset
Setting
Display Rev =
Display =
8
000 - 005 Strobe open
006 - 010 Strobe closed
011 - 033 Puls Random, slow -> fast
034 - 056 Ramp up Random, slow -> fast
057 - 079 Ramp down Random, slow -> fast
080 - 102 Random Strobe Effect, slow -> fast
103 - 127 Strobe Break Effekt, 5s.....1s (Short burst with break)
128 - 250 Strobe slow -> fast <1Hz - 20Hz
251 - 255 Strobe open
000 - 255 0% to 100%
000 - 255 0% to 100%
- 255 0% to 100%
000 - 255 0% to 100%
000 - 255 0% to 100%
000 - 005 Colour off
006 - 013 Colour Macro 1 (Colour Jump)
014 - 021 Colour Macro 2 (Red 1 Step)
022 - 029 Colour Macro 3 (Green 1 Step)
030 - 037 Colour Macro 4 (Blue 1 Step)
038 - 045 Colour Macro 5 (Yellow 1 Step)
046 - 053 Colour Macro 6 (Cyan 1 Step)
054 - 061 Colour Macro 7 (Magenta 1 Step)
062 - 069 Colour Macro 8 (2step Magenta Yellow)
070 - 077 Colour Macro 9 (2step Red Green)
078 - 085 Colour Macro 10 (2step Red Blue)
086 - 093 Colour Macro 11 (2step Blue Yellow)
094 - 101 Colour Macro 12 (2step Green Blue)
102 - 109 Colour Macro 13 (2step Magenta Blue)
110 - 117 Colour Macro 14 (2step Green Yellow)
118 - 125 Colour Macro 15 (2step Cyan Magenta)
126 - 133 Colour Macro 16 (2step Cyan Red)
134 - 255 No function
000 - 255 slow -> fast
xxx
ON
Flip display
OFF
ON
Display lighting
OFF
= Rotate display by 180° (e.g. for overhead installation)
= No display rotation
= Permanently on
= Deactivation after one minute of inactivity