10 Device LED feedback messages
10.1 Flash codes
Different actuator states are indicated by the channel
LED/channel LEDs flashing:
Slow flashing
Fast flashing
One long, x-short
(depends on the type
of error)
Note: Only one LED exists for both channels
for radio-controlled switch actuator 2 channel.
The respective flash code appears as soon as
a channel is in the corresponding status.
10.2 Operational status display
As soon as a relay of the device is tripped, the device
LED is continuously illuminated.
After configuring the actuator with the center or a
programming tool, the device LED indicates other
device states besides those described.
46
Teach mode
Reset
Error