Safety; Intended Use - LR DDP-2 Bedienungsanleitung

MANUAL

2. Safety

2.1 Intended use

The di feren al pressure gauges f
control of low di feren al pressures where there are f
one-sided overpressure and sta c pressure.
Typical markets for these products are the shipbuilding industry, process hea ng
technology, the hea ng, ven la on and air-condi oning industries, the water/
wastewater industry, and machine building and plant construc on. For these, the
main func on of the measuring instruments is the monitoring and control of ilters,
compressors and pumps.
The instrument has been designed and built solely for the intended use described
here, and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on opera on
contrary to the intended use.
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • DT-Info@Leitenberger.de • www.druck-temperatur.de • www.LR-Cal.net
Differenzdruckmessgerät DDP-2
Differen al pressure gauge DDP-2
WARNING!
Before installa on, commissioning and opera on, ensure that
the appropriate diferen al pressure gauge has been selected
in terms of measuring range, design and speciic measuring
condi ons.
Check the compa bility with the medium of the materials
subjected to pressure!
In order to guarantee the measuring accuracy and long-term
stability speciied, the corresponding load limits must be
observed.
Only work on the gauge with the voltage disconnected.
Non-observance can result in serious injury and/or damage to
the equipment.
Further important safety instruc ons can be found in the
individual chapters of these opera ng instruc ons.
DDP-2 are primarily
DRUCK & TEMPERATUR Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
used for the monitoring and
high requirements in terms
18
f