Dahua Technology NVR1B04 Bedienungsanleitung Seite 41

Owner's manual
Step 2
Open the app. Select your region and accept the required permissions if necessary.
Step 3
Enter Camera tab in the start screen. To add new device, press
Manager. Press + to enter new device adding interface. Select Wired device.
Step 4
The screen will display a list of possible methods for adding a device. Select appropriate.
Note:
• when selecting P2P, make sure the P2P function is enabled for the NVR (Main menu >
Settings > System > Network > P2P).
• when adding a new device, scan the QR code on the product or its box. The QR code is also
available in Main menu > Settings > System > Network > P2P – SN QR code.
→
NOTE: The following images are for reference only. The actual product shall prevail.
→
Figure 6-1
and then Device
→
41