SW-Motech PRO Anbauanleitung Seite 135

3
Install toolbox lock
3.1 - Insert the lock (4) with the sealing ring (*) supplied with the toolbox in
the lock hole of the cover. Secure the lock (4) on the inside with the safety clip
(4)
 NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder!
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
6
1
3
×
Errors and omissions excepted
Subject to technical and design changes.