Herunterladen Diese Seite drucken

k'nex Collect & Build Super Swing 4 Bedienungsanleitung Seite 3

Werbung

BUILDING BASICS
Getting Started:
1
To begin your model, find the
and follow the
numbers. Each piece has its own shape and color.
Just look at the pictures, find the pieces in your
set that match and then connect them together.
Try to face your model in the same direction as
the instructions while you build. Faded colors
show you this section is already built. You'll want
to connect the new section to the place where the
arrows are pointing.
3
1
2
4
1
3
Spacers:
There are places in your model where you need to
add blue and silver Spacers. Be sure to use the
right color and count them carefully.
Connectors:
There are blue and gray Connectors with special
long slots. They slide together as you see in the
pictures. Push these parts together until you hear
a "click."
Gears:
To engage the Gears, push the tan Lock into the
holes of the Gear. Note the postion of the Gears
and the direction of the teeth. Make sure these
Gears mesh.
Parts Count:
Before you start building, be sure to compare the
parts in your set with the parts listed here.
If anything is missing, call or write to us using the
information on the back cover. We're here to help!

Werbung

loading

Diese Anleitung auch für:

120723262