Concept OV5230 Bedienungsanleitung Seite 21

EN
PRODUCT DESCRIPTION
A Handle
B Control panel with display
C Air outlet
D Dust filter
E Water filter
F Container lock
A
G Water tank
H Remote control
I Cooling box
C
DESCRIPTION OF THE CONTROL PANEL
1 Cooling mode button
2 Oscillation button
3 Timer button
4 Airflow speed adjustment button
5 Mode setting button
6 ON/OFF switch button
1 2
Note: Functions on the control buttons of the control panel correspond to the functions of the buttons on the remote
control.
40
B
H
3 4 5 6
OPERATING INSTRUCTIONS
Connect the power cord to the mains. The appliance is in standby mode.
ON/OFF button (6)
D
Press the ON/OFF button to switch off the appliance. After switched on, the appliance starts at low airflow speed.
Airflow speed setting button (4)
E
Press this button to change the airflow speed in 3 levels (the corresponding indicator always lights up on the display).
Mode setting button (5)
Press this button to choose from 2 saved modes:
1. Sleep
F
a. If the appliance is on high power, the appliance will run on high natural breeze power for 30 min, after 30 min
G
the appliance will run on medium natural breeze power and after another 30 min the appliance will run on low
natural breeze power.
b. If the appliance is on medium power, the appliance will run on medium natural breeze power and after 30 min
run on low natural breeze power.
c. If the appliance is on low power, the appliance will run on low natural breeze power continuously.
2. Natural breeze: The appliance will alternately increase and decrease power.
Timer button (3)
Use the timer button to set the required operating time 1h, 2h and 4h.
Oscillation button (2)
I
Press this button to switch on/off the oscillation function.
Cooling mode button (1)
Press this button to switch on/off the air cooling function.
Note: Always pour water into the water tank before starting the cooling mode!
Filling the water tank with water
Always switch off the appliance and unplug it from the mains before filling or emptying the water tank.
• Release the lock of the water tank on the back side of the appliance.
• Remove the water tank from the appliance. (In order to completely remove it, you need to release the pump
locks inside the tank and remove the pump. Make sure that the pump is installed in its original position before
reinstalling the tank.)
• Fill the water tank with water (we recommend using demineralized water to ensure maximum lifetime of the
appliance).
• Make sure that the water level is between the MIN and MAX lines.
• Adding ice cubes or freeze packs into the water in the water tank make the air cooling function more efficient (the
freeze packs can be re-frozen and reused).
• Make sure that the water level does not fall below the MIN line (applies only in active cooling mode).
• We recommend changing the water at least once a week.
EN
41