Devon TREAD 2 Kurzanleitung Seite 8

NOTE: The internal charging cradle within the Tread
2 box can be removed from the box in order to be
used as a stand-alone charger. First, unplug the
power adapter from the back of the box. Then re-
move the charger stand by holding the box with one
hand and pulling up on the cradle with the other.
Once the stand is removed, the velvet insert can
be removed from the stand. Plug the power
adapter back into the stand and use the charging
stand as needed.
All manuals and user guides at all-guides.com
R E P L A C E M E N T
The Tread 2 is equipped with the highest quality
rechargeable battery. With normal use, your
battery should not need to be replaced for many
years. When the battery needs replacement please
use only those that are supplied by an authorized
Devon Works retailer or service center.
C A R E A N D M A I N T E N A N C E
G E n E r a L C a r E
The Tread 2 is designed and manufactured to
function and retain its beauty and character, however
care should be taken to protect your watch from
extenuating circumstances. Avoid shocks, whether
physical, thermal or other. Avoid exposure to extreme
temperatures (greater than 60°C/140°F, less than
0°C/32°F) or acute temperature changes.
C h E M i C a L r E s i s ta n C E
The Tread 2 is manufactured from many
different materials and each material has its own
characteristics and reacts differently to contact
with varying chemicals. While one material
may withstand the effects of many chemicals,
others may not have the same resistance. For
this reason, DEVON recommends avoiding direct
contact with solvents, detergents, perfumes,
cosmetics etc., since they may damage the
strap, case, or gaskets.
The lens on the Devon Tread 2 watch is
manufactured from top quality sapphire. While
sapphire provides an extremely hard surface
that resists scratches, sapphire is brittle and can
crack under extreme forces.