Devon TREAD 2 Kurzanleitung Seite 7

B AT T E R Y
B at t E r y L i f E i n d i C at O r
The Battery Life Indicator is
automatically entered when
D I S P L AY
the watch is turned OFF.
The minute belt will ad-
vance to a number between
0 and 10 to indicate the
percentage of battery life
remaining when the Tread
2 enters OFF mode. For
instance: if 9 is indicated,
the battery has 90% power
reserve; if the 5 is indicated,
the battery has 50% power
reserve, and so on.
All manuals and user guides at all-guides.com
L O W B at t E r y i n d i C at O r
If a low battery is detected by the Tread 2, the
Tread 2 will automatically turn off. This allows the
internal circuitry to retain the correct time before
the battery level is completely depleted. This is an
indication that the Tread 2 should be placed onto
the charging station.
hours
minutes
If the Tread 2 is not placed on the charging
station, the battery will continue to drain. The
seconds /
Tread 2 must be placed in the charging station
battery life
within a short period of time to retain the set time.
Once the battery level is brought back to a usable
level, the Tread 2 can be turned on again.
During LOW BATTERY Mode, the Tread 2 may be
turned on again to show the current time, but will
not be allowed to enter into SECONDS mode or
CHRONOGRAPH mode.
C H A R G I N G
The Tread 2 is charged through an inductively
coupled wireless charging system. Plug the Tread 2
box into an electrical receptacle using the included
DC power adapter. To enable charging, place the
Tread 2 on its specialized cradle in the Tread 2 box.
Once the watch is placed in the cradle, the charging
of the internal battery will start.
NOTE: The watch must be fully engaged in the cradle
in order to charge.
As the battery is charged, the battery level indicator in-
creases showing the current level of the battery. Battery
charging will automatically stop when the battery is full.
Once the battery is fully charged, the charging circuitry will
continue to trickle charge the battery to ensure it remains
fully charged. Because of this technology it is not possible
to overcharge the battery of the Tread 2.
The Tread 2 is supplied with 100-240V charger plug.
In some regions, a plug adapter may be required. See
www.devonworks.com for more information on obtaining
the correct adapter for your region.