Instructions; Instructions For Charging; Instructions For Use; How To Use - Prorelax SONIC EFB-2135 Gebrauchsanleitung

INSTRUCTIONS

INSTRUCTIONS FOR CHARGING

1. Always ensure that your hands, Handle and USB charging stand are dry before
charging.
2. Make sure the device is power off.
3. The charging stand allows charging the device either a traditional wall mount
approved AC adaptor (not provided) or USB port on a computer. A USB charging
cable is provided.
4. Connect the USB micro plug to the USB charging slot at the back of the charg-
ing stand.
5. Connect the USB charging cable to the approved AC adaptor (not provided) or
USB port on a computer for charging the device.
6. Put the device into the charging stand.
7. Both LED indicator will lit on and then the LED indicator (M/T1/T2) will flashing,
the device is now in charging mode.
8. When the battery is fully charged, LED indicator (M/T1/T2) will fully lit on, after 5
minutes the LED will come dimmer. The device is now fully charged.
9. Now unplug the AC adaptor or disconnect from the computer USB port.
10. The device is now fully charged and ready for use.
NOTE:
• Make sure the device is fully charged before you use it for the first time.
• Do not use charger inside bathroom or on any metal surfaces to prevent interfere
with proper device charging.
• Fully charge the device takes approximately 4 hours.
NOTE:
When the battery is almost empty, the LED indicator (M/T1/T2) will flashes.
The battery still have enough power for a complete cleansing cycle. To charge
the device, follow the steps in section "Instructions for Charging" above.
Instructions
8
INSTRUCTION FOR USE
1. This device can be used under the shower or in front of the sink.
2. DO NOT submerge the device in water.
3. Always choose the speed setting & brush head most comfortable for you.
4. Moisten the brush bristles by running under water.
5. Dampen your skin with water and apply cleanser onto your skin. Alternatively,
apply your cleanser directly onto the brush.
6. Place the brush directly onto your skin.
7. Press the Power Switch to switch-on the device.
8. Press and hold the Power Switch to select your desire cleansing intensity
(S1/S2/S3)
9. You can further choose the T-zone timer cleansing programs or massage mode.
For details, refer to "How to use" section.
10. When finish, press the Power Switch to switch off the device.

HOW TO USE

1. Speed Selection
When switch-on the device, the default speed level is S1. Press and hold the Power
Switch to select your desire cleansing intensity (S1/S2/S3).
3 Speed Levels
S1 - Gentle Soft power
Safe for compromised or delicate skin, ideal for sensitive skin conditions
S2 - Normal power
Designed for normal cleansing, universal for all type of facial skins.
S3 - Full Sonic Power
Provide the maximum sonic power for extra boost to loosen and remove dirt
and dead skin debris.
NOTE:
The device will remember the last operation speed level after switch-off.
Instructions
8