Foscam FN9108HE Benutzerhandbuch Seite 9

7. NVR DHCP Server Settings: If the NVR does not detect and connect to a router within 30
seconds, the NVR DHCP server will activate. This is used for searching and connecting to
the IPC on the PoE NVR or switch. If a router is connected during this time, the NVR may
not be found when adding it via the APP or VMS. In such cases, restarting the NVR is
necessary. Note: Users have the option to customize the startup time or disable the NVR
DHCP server as per their requirements.
Logging In
1. Power Up Your NVR: Flip the power switch located on the rear panel to turn on the NVR.
Upon successful startup, the power LED and HDD LED indicators will illuminate in green,
and the startup page will appear on the screen.
2. Set a New Username and Password: To ensure your security, it is vital to establish a fresh
user name and password for your NVR before logging in.
3. Logging In: Access the login page and provide your newly set Username and Password.
Click on the OK button to proceed.
4. Accessing the Setup Wizard: After modifying your password, you will automatically be
directed to the Setup Wizard for further configuration.
9