Foscam FN9108HE Benutzerhandbuch Seite 12

Adding an IP Camera
1. To begin, right-click on the main interface and choose "Channel Config.
2. Next, select your IP Camera from the list or opt for "Auto Added IPC" if available.
3. Click on the "Add" option to initiate the camera addition process.
4. If your camera requires a username and password, provide the necessary credentials.
However, if your camera is in the factory default state, entering a username and password
may not be necessary.
5. Click on the "OK" to confirm your settings and save the changes.
Depending on the type of IP Camera you have, select the corresponding protocol:

FOSCAM Protocol: Opt for the FOSCAM protocol if you are using High Definition (HD) IP
Cameras specifically designed for Foscam.

ONVIF Protocol: For IP Cameras that support the ONVIF protocol, select this option.
ONVIF is a standard protocol that enables interoperability between different IP cameras
and network video recorders.
2. Click on Add
12
1. Select your IP camera