Foscam FN9108HE Benutzerhandbuch Seite 18

Upgrading NVR and Firmware
It is possible to perform system upgrades for your NVR and cameras using local software.
NVR Upgrade:
To upgrade your NVR, download the firmware to a U disk and insert it into the NVR's USB
port. Then, right-click on the NVR, access the Main Menu, and choose Upgrade. Click on
Refresh to detect the firmware on the U disk and proceed by clicking Upgrade to initiate the
NVR upgrade process.
1. Click the button to choose and save
the firmware onto the U-disk
2. Click the button to
upgrade
Note: Do not power off the device during the upgrade process. After the upgrade is
complete, the NVR will restart automatically.
You have the option to upgrade your NVR's firmware using Foscam VMS. Simply open
Foscam VMS, log in, and then navigate to Setup > System > System Upgrade to proceed
with the firmware upgrade.
18