Foscam FN9108HE Benutzerhandbuch Seite 5

Hard Disk Mounting
Be Aware:

Prior to installing a hard disk drive (HDD), ensure that the NVR is disconnected from the
power source.

For optimal performance, it is advisable to use a hard drive with a speed of 7200 RPM or
higher.
1. Open the NVR cover by unscrewing the screws located at the rear and bottom of the
device.
2. Attach one end of the data cable and power cable to the NVR's motherboard and the
other end to the HDD.
HDD
Power Cable
5
Data Cable