AMZLAB C502-2200D Bedienungsanleitung Seite 17

CLEAN-UP AND STORAGE
Shutting Down the Pressure Cleaner
WHEN FINISHED USING THE PRESSURE CLEANER, FOLLOW THESE STEPS
TO SHUT DOWN THE UNIT:
Turn the pressure cleaner to the OFF position.
Turn off the water supply.
Before disconnecting high-pressure hose connection, point the gun in a
safe direction and discharge the high-pressure water.
Disconnect high-pressure hose from the pressure cleaner and gun.
Disconnect garden hose from the pressure cleaner.
Remove quick coupler fitting from garden hose and attach to the nipple
portion of the fitting installed on the pressure cleaner for storage.
Remove excess water from the pump by tipping the unit on both sides to
drain any remaining water from inlet and outlet fittings.
Remove Water Intake Filter and flush with water to remove dirt or debris.
Return filter once cleaned.
Drain detergent reservoir and flush with running water.
Wipe away any remaining water on all parts and fittings.
Engage the gun safety lock.
Store the pressure cleaner, parts, and accessories in an area with a
temperature above 0 ℃ (32 ℉ ).
Show the figure
15