AMZLAB C502-2200D Bedienungsanleitung Seite 10

Step 4
Insert the adjustable spray nozzle(N) into the gun. Push and turn the adjustable
nozzle clockwise onto the gun(L) until hand tight to lock it in place. When the
pieces are joined properly, you cannot separate the two components by pulling
straight out on the adjustable nozzle. All attachments must be inserted into the
gun for proper use.
N
L
Step 5
Attach the high pressure hose(E) to the gun(L). Insert and quick-connect
it tight to avoid leakage. When the pieces are joined properly, you cannot
separate the two components by pulling straight out from the gun(L). Push the
hose lock button, then you can pull out high pressure washer.
L
E
Step 6
Attach the high pressure hose(E) to the
pressure cleaner water outlet. Insert and
quick-connect it tight to avoid leakage.
When the pieces are joined properly, you
cannot separate the two components by
pulling straight out from the water outlet.
Push the "Button" according to the direction
of arrow, then you can pull out the high
pressure hose.
E
08