Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Bleeding the Gun
It is very important to bleed the gun before using the pressure cleaner. Refer to the
"Assembly Instructions" to assemble the pressure cleaner. To bleed the gun, simply
connect the garden hose to the pressure cleaner and squeeze the trigger before
turning the electrical supply on. This allows any air trapped inside the pressure
cleaner and gun to be removed before using the unit. Continue holding trigger for
approximately one minute to allow any excess air out of the unit. Water will flow
through the gun at low pressure during this procedure. For more bleeding tips, see
the section titled "Operating Instructions".
Gun Safety Lock
This pressure cleaner is equipped with a gun trigger safety lock. When not using
the pressure cleaner, use the safety lock to keep from accidentally engaging the
high pressure spray.
Unlock
Lock
Adjustable Spray Nozzle
Diagram 1
Diagram 2
11
Werbung
