Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Step 7
Insert the karcher connector(K) into the gun. Push and turn the connector
clockwise onto the gun(L) until hand tight to lock it in place. When the pieces
are joined properly, you cannot separate the two components by pulling
straight out on the connector. All attachments must be inserted into the gun
for proper use. After installing, it can be used with the karcher's lance
L
K
Step 8
Attach the hose connector to pressure washer. Before attaching the connector
to the male fitting, remove the plastic cap, which is inserted onto the male
fitting on the pressure washer before shipping. This plastic cap can be
discarded once removed. After both components have been installed, attach
the garden hose with connector screw on the pressure washer. Connect the
garden hose to the waterspout.
09
Werbung
