Electrolux ERC39353X Benutzerinformation Seite 28

28 www.electrolux.com
7.4 Door reversibility
Before carrying out any operations, re-
move the plug from the power socket. To
change the opening direction of the door,
proceed as follows:
2
D
A
E
5
1
F
4
• To carry out the following operations,
we suggest that this be made with an-
other person that will keep a firm hold
on the doors of the appliance during
the operations.
Open the door with the appliance
in the upright position. Unscrew the
screws and remove the upper door
plastic trim.
Remove the little plastic cover from
the door plastic trim and refit on
the opposite side (D).
Lay down the appliance back side
down.
D
Remove the screw of the hinge
cover plug (A).
B
Unscrew the upper hinge and re-
move it (B).
C
Unscrew the screw and remove the
door stopper (C).
Remove the door.
Remove using a tool the cover (E),
unscrew the lower hinge pivot (F)
and place it on the opposite side.
Reinsert the cover (E) on the oppo-
site side.
Reinsert the door.
3
Pay attention that the front board
of the doors are parallel to the front
board of the top.
Fix the door stopper on the oppo-
site side.
Position and fix the upper hinge
(that can be found in the instruction
for use bag) on the opposite side.
Fix the screw of the new cover
hinge (that can be found in the in-
struction for use bag).
Lift up the appliance to vertical po-
sition.
Open the door and reposition the
upper door plastic trim with
screws.