Werbung
Verfügbare Sprachen
Verfügbare Sprachen
26 www.electrolux.com
6.1 Replacing the lamp
1
6.2 Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to
"Installation".
7. INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
2
1.
Switch off the appliance.
2.
Press on the rear hook and at the
same time slide the cover in the direc-
tion of the arrow.
3.
Replace the lamp with one of the
same power and specifically designed
for household appliances. (the maxi-
mum power is shown on the lamp
cover).
4.
Slide the lamp cover into its original
position.
5.
Switch on the appliance.
6.
Open the door. Make sure that the
light comes on.
3.
If necessary, replace the defective
door gaskets. Contact the Service
Center.
Werbung
