Hacker C50 Wartungsanleitung Seite 7

Wartungsanleitung C50 Wartungsanleitung C50
-Clean the planetary gears from old grease
-Put a small quantum of new grease on each of the three small shafts
-Fill the planetary gears with new grease
-Put the syringe on the planetary gears
-Put your finger on the other side to close the hole
-Press now the grease inside the planetary gear
-The gears should be filled competely
-Check this from both sides
-Put the gears now back on the small shafts
-Check the direction! You must be able to read the words on the bearings!
-Push it on the shaft by using your index-finger
-Put a small quantum of grease in the middle
-Asmall quantum is enough
Hacker Motor GmbH
Hummler Str. 5
D-85416 Niederhummel
WWW.HACKER-MOTOR.COM
Stand: 09/2005
Tel.: 08761-752 129
Fax.: 08761-754 314
email: info@hacker-motor.com