Hacker C50 Wartungsanleitung Seite 5

Maintenance C50 Maintenance C50
Maintenance C50-Acro-Competition
Dear Customer
Thank you very much for purchase of the C50-Acro-Competition motor,
Anew generation of High-End-Motor "Made in Germany".
This power-system offer high power efficiency combined with low weight and compact dimensions.
For best performance and reliability, use this guide for regrease the gearbox all 50 to 70 flights.
You have to remove the gearbox, clean the gearbox, pinions and needlebearings, put new grease inside and mount
the gearbox.Please read this guidance one time completely and than begin step by step.
If you have any questions, feel free to contact us:
Email:
Phone:
You need the following equipment:
- Clean Desk
- Hex key wrench, size 2
- Special grease "C50-Competition" (available as
sparepart)
- Kleenex
-Loctite® 222
-Unscrew the four screws which hold the gearbox on the
motor
-Begin with screws on opposite positions
-First, just open the screws very carefuly (max. 1/4 turn)
-When all four screws are completely unlocked, you can
put the screws out
-Put the screws on your side
Hacker Motor GmbH
Hummler Str. 5
D-85416 Niederhummel
Service@hacker-motor.com
+49-8761-752 129
WWW.HACKER-MOTOR.COM
Release: 09/2005
Tel.: 08761-752 129
Fax.: 08761-754 314
email: info@hacker-motor.com