Werbung
Fitting the folding clasp with strap-length quick adjustment (optional)
We recommend that you completely fit the folding claps before shortening the
silicone strap. Doing so will enable you to make a better assessment of whether
you need to shorten the silicone strap.
Open the retaining bar on the unfolded folding clasp and guide the silicone
strap half with the stud
B
at position 2 from above via the insertion slot into the
guide rails of the folding clasp. Position the silicone strap so that you can move it
at least one position forward and one position back (standard position, see
diagram). To make the silicone strap tighter, move it one position to the left. To
make the silicone strap looser, move it one position to the right.
B
Bring the silicone strap to the standard
position and press the retainer bar into the
appropriate free spindle on the silicone
strap. Check whether the retainer bar is
securely locked into place. Try on the fully
fitted silicone strap on your wrist.
2
1
B
Standard position
Insertion slot
31
Werbung
