BEHA UNITEST Hexagon 50 Bedienungsanleitung Seite 40

5.7 Temperature Measurement
Prior to any temperature measurement it has to be ensured that the
surface to be measures is not live. Failure to comply with this pre-
scription can lead to dangerous corporal user injuries or cause
instrument damage.
To avoid burns only touch UUT by means of the thermocouple.
Position measurement function selection switch to °C - measure-
ment range.
Connect the minuspole of the probe to the COM socket and the rp-
luspole of the probe to the
Connect temperature probe to UUT.
Read the measurement result displayed on the screen.
Temperature Measurement
40
socket.