BEHA UNITEST Hexagon 50 Bedienungsanleitung Seite 34

5.2 Resistance Measurement
Prior to any resistance measurement it has to be ensured that the
resistor to be tested is not live. Failure to comply with this pre-
scription can lead to dangerous corporal user injuries or cause
instrument damage. Additionally, foreign voltages falsify the mea-
surement result.
Select measurement range
measurement function selection switch.
Connect the black test lead to the COM socket and the red test lead
to the
Connect the test leads to UUT.
Read the measurement result displayed on the screen.
-
Resistance Measurement
34
2MΩ, 200k¨Ω,, 20kΩ or 2000Ω
socket.
+
via