Toshiba RAV-HM561FT-E Bedienungsanleitung Seite 54

 Group control
"Swing operation" can be set individually for each unit when the operation is in group control.
Operate the remote controller according to the procedure below before setting each function.
Wind direction
– 1 – 1 – – 1 – 4
– 1 – 2 – 1 – 5
– 1 – 3 ALL
Return
Unit Set
Wind direction
– 1 – 1 – – 1 – 4
1 – 2 1 – 5
– –
– 1 – 3 ALL
Return
Unit Set
Address is displayed here.
1–1 Wind direction
Return Louver
Swing ON
105-EN
1
Push the [ MENU] button during
operation.
Push the [ ∧ ] / [ ∨ ] button to select
"1. Wind direction" on the menu screen,
then push the " Set" [ F2]
Set
button.
2
Push the " unit" [ F1] button to
Unit
select the unit to set.
The selected unit changes as follows each time
the button is pushed:
1-1 1-2 ALL
3
Push the " Set" [ F2] button.
Set
The setting display for the selected unit
appears.
4
Push the " Swing ON" [ F2]
Swing ON
button on the "Wind direction" screen.
5
Push the [ CANCEL] button.
Pushing the [ CANCEL] button returns to
the previous screen.
• The number (address) of the selected unit appears
on the upper left of the screen, unless "ALL" is
selected for the unit selection.
– 53 –
7
Energy saving operation
Perform the power saving operation of the air conditioner.
Energy saving(1/2)
1.Energy saving operation
<ON>
2.Set temp. range limit
3.Return back
<OFF>
Return
Set
Energy saving operation
1.Energy saving operation
ON / OFF
2.Energy saving ratio
3.Energy saving schedule
Return Fix
1
Push the [ MENU] button.
2
Push the [ ∧ ] / [ ∨ ] button to select
"9.Energy saving" on the menu screen, then
push the " Set" [ F2] button.
Set
3
Push the [ ∧ ] / [ ∨ ] button to select
"1. Energy saving operation" on the
"Energy saving" screen, then push the
" Set" [ F2] button.
Set
4
To start the Energy saving operation:
After setting "2. Energy saving ratio" and "3.
Energy saving schedule", push the
" " [ F1] button to select
←

"ON", then push the [ MENU] button.
To stop the Energy saving operation:
Push the " →" [ F2] button to

select "OFF", then push the [ MENU]
button.
106-EN