Bosch Advanced HedgeCut 36V-65-28 Originalbetriebsanleitung Seite 14

14 | English
Technical Data
Cordless hedge trimmer
Article number
Stroke rate at no-load
Cutting length
Tooth opening
Max. cutting diameter
Weight according to EPTA‑Procedure 01:2014
Serial number
Recommended ambient temperature during charging
Permitted ambient temperature during operation
Battery type
A) Depends on battery in use
B) Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according to EN
62841-4-2:2019 .
Typically the A-weighted noise levels of the product are:
Sound pressure level 75 dB(A); sound power level
95 dB(A). Uncertainty K = 2.0 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-4-2:2019 :
2 2
a 5.0 m/s , K = 2.0 m/s .
h
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
with a standard test method any may be used for comparing
one tool to another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
That the vibration and noise emissions during actual use of
the power tool can differ from the declared values depend-
ing on the ways in which the tool is used especially what kind
of workpiece is processed; and of the need to identify safety
measures to protect the operator that are based on an estim-
ation of the exposure measures in the actual conditions of
use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running
idle in addition to the trigger time).
Switching on
For Your Safety
Caution: Switch garden tool off and remove battery
u
from machine before adjusting or cleaning.
The blades continue to move for a fraction of a second
u
after the hedge trimmer is switched off.
Do not touch the moving blades.
u
F 016 L94 293 | (08.03.2022)
A)
B)
and storage
Charging the Battery
Pay attention to the mains voltage. The voltage of the
u
power source must match the voltage specified on the
rating plate of the charger.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 35 °C. In this manner, a high battery service life is
achieved.
Note: The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery in the
battery charger before using for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not cause damage to the battery.
The "Electronic Cell Protection (ECP)" protects the lithium-
ion battery against deep discharging. When the battery is
empty, the product is switched off by means of a protective
circuit: The product no longer operates.
Do not continue to press the On/Off switch after an auto-
matic shut-off of the product. The battery could become
damaged.
Observe the notes for disposal of the battery.
Inserting/Removing the Battery (see figure B)
Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
Insert the charged battery (9). Ensure the battery is inserted
correctly.
To remove the battery (9) from the machine, press the bat-
tery unlocking button (7) and pull the battery out.
AdvancedHedgeCut 36V-65-28
3 600 84A ...
-1
min
cm
mm
mm
kg 3.5 (2.0 Ah) – 4.8 (4.0 Ah)
see type plate on garden tool
°C 0 ... +35
°C -10 ... +40
GBA 36V
2.0 Ah, 4.0 Ah
Bosch Power Tools
3200
65
30
28