V-ZUG 540 Installationsanleitung Seite 11

V ZUG AG
Industriestrasse 66, Postfach 59, 6301 Zug
Telefon 041 767 67 67, Fax 041 767 61 61
vzug@vzug.ch, www.vzug.ch
Installation instructions
The mounting sequence is applicable for
Solo installation
Installing above oven
Important
Air circulation is by so-called vanity gaps or ventilation meshes over the above mounted, shortened cupboard unit.
Route the electrical supply cable so that it cannot contact the hot parts of the back of the appliance.
The niche must be adapted to the unit width 550 mm for the installation of the build-in fittings.
Installation instructions
If fitting in flammable material, the NIN regulations and the fire protection guidelines from the Swiss Association of
Cantonal Fire Insurance Companies must be strictly observed, as must therequirements of the relevant fire authorities
Installation variants
Solo installation
A Normal oven/Tall unit
B Oven/Oven with air extraction
C Tautly installed flex. alu. hose
Installation instructions
Microwave
Miwell SLI, Type of construction 60-381
Model 540
Installing above a normal oven Installing above an oven
Q/R
A
Installing above oven
A
with air extraction
Mount an angle bracket Q on the left and right using the
supplied chip board screws R.
Observe a distance of 3/6 = 381 mm from the above
mounted, shortened cupboard unit (Set K0.3448 is not
included in the supply).
J540.51 2
26.5.08 ITH
11/12
C
Q/R
B