Styro Hansa Halo Gebrauchsanleitung Seite 8

Turning the light on/off
1. Insert the plug in a socket.
2. Arrange the light in the desired position.
3. Touch the touch switches to turn on/off
and control the lamp.
short touch: ON / OFF
long touch: color temp. change
Lighting source
• Lighting source service life: 35 000 hours
• The lighting source cannot be replaced.
• The construction of the luminaire does
not allow the lighting source to be
replaced, as there is a risk of damaging
the luminaire.
Care and cleaning
WARNING
Hazardous grid voltage!
Risk of electric shock!
Improper use could result in
electric shock.
– When cleaning the light, always pull the
mains plug out of the socket. When doing
so, always take hold of the plug and not
the cord.
– Make sure that no water penetrates the
inside of the light or other parts carrying
a current.
– Carefully wipe off the light with a damp
cloth or a dry dust cloth.
8
GB
Technical data
Voltage:
Power:
Luminous flux:
Colour temperature:
Protection class:
Ingress protection:
Model number:
This product contains a light source of
energy efficiency class F.
Distribution
dimming (+ / -)
styro ag
Frauholzstrasse 27
CH-6422 Steinen
Tel. +41 (0)41 833 80 10
www.styro.ch
EU Distributor
styro GmbH
Industriestrasse 2
D-91583 Schillingsfürst
Tel. +49 9868 98949-0
www.styro.de
OPERATING INSTRUCTIONS
LED lamp Halo
100 – 240 V AC / 50 – 60 Hz
41-5011.002-003
6 W
300 lm
2700 – 6000 K
II
IP20