Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Comfort Electronics K4,
Operation, Maintenance, Troubleshooting
36
Closing the
Program Menu
(Possible at any time without
saving any changes.)
Press the >42° (
) button
to leave the program menu.
Resetting program values
to the
factory settings
(Resets all program values to
factory settings.)
Press the >42° (
) and
Overhead shower ( ) but-
tons for at least 5 seconds un-
til RES apears (press the
>42° (
) button again to
stop the reset).
Press the Mode (
) button:
The reset is performed.
Resetting to the factory
settings for mixer tem-
perature / setting curves
(Resets all system configu-
ration values to factory
settings.)
Press the >42° (
) and
Hydromassage (
)
buttons for at least 5 seconds
until trC appears (press the
>42° button again to stop the
reset).
Press the Mode (
)
button:The reset is performed.
Werbung
