Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Automatic shower func-
tion switch-off time.
(Determines the time after
which the control returns to
"stand-by" mode.)
Press the + (
) button to
start the next program item
PO3. Press the Mode (
button: The value 15 min ap-
pears. Use the +/- (
and
) buttons to set the value
within the 1 to 50 minutes
limits. Press the Mode (
button to save the setting.
The display shows: PO3
Automatic lighting
switch-off
(The time after which the
shower lighting automatically
switches off. Starts after all
the showers have been turned
off.)
Press the + (
) button to
display the next program item
PO4. Press the Mode (
button: The value 2 min ap-
pears. Use the +/- (
and
) buttons to set the value
within the 1 to 50 minutes
limits. Press the Mode (
button to save the setting.
The display shows: PO4
Configuration code
(Provides the service techni-
cian with informaion about
the connected devices. Can-
not be changed.)
Press the + (
) button to
start the next program item
PO5. Press the Mode (
button: The three digit
configuration code appears.
Operation, Maintenance, Troubleshooting
)
)
)
)
)
Comfort Electronics K4,
Software code
(Provides the service techni-
cian with information about
the software used. Cannot be
changed.)
Press the + (
) button to
display the next program item
PO6. Press the Mode (
button: The three digit soft-
ware code appears.
Characteristic curve
(Serves to determine the char-
acteristic curv.)
Press the + (
) button to
display the nex progrm item
PO7. Press the Mode (
button: The value 1 appears.
Use the +/- (
or
) but-
tons to set the value to:
0 = (No) or 1 = (Yes).
Press the Mode (
) button
to save the setting.
The display shows: P07
35
)
)
Werbung
