Power On And Off - OneOdio OpenRock Pro Benutzerhandbuch

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
Operation Guide

Power On and Off

The earbuds will be powered on automatically when the cover is opened or press and
hold the touch control area for three seconds when the earbuds are turned off to
powered them on. The earbuds will be powered off automatically when the cover is
closed, and they are in the case or press and hold the touch control area for five
seconds when the earbuds are turned on to power them off.
Pairing
First, open the charging case, take out the earbuds and remove the charging protective
film. Place the earbuds back into the charging case and close the lid. Wait for about 10
seconds, then open the charging lid, and the earbuds will turn on automatically. White
light flickering signalises that the earbuds are in a pairing mode. Search for
"OpenRock S" in your phones Bluetooth list and connect to them. After successful
pairing, white light blinks for a second.
Manual Bluetooth Pairing
Place the earbuds inside the charging case and keep the case open. Press and hold the
button on the charging case for five seconds. The indicator light on the charging case will
flicker three times. Choose "OpenRock S" from the Bluetooth list on the device to be
paired. After successful pairing, the white indicator of the earbuds will remain on for a
second.
3