Add Device - Sonoff BASICR3 Benutzerhandbuch

Power on
After powering on, the device will enter quick pairing mode (Touch) during the first use.
The Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
The device will exit the quick pairing mode (Touch) if not paired, within 3mins. If you
want to enter this mode, please long press the manual button for about 5s until the Wi-
Fi LED indicator changes in a cycle of two short and one long flash and release.

Add device

Quick Pairing
Tap "+" and select "Quick Pairing", then operate following the prompt on the APP.
7