fillikid G2 Bedienungsanleitung Seite 11

EN
IMPORTANT
Follow the manufacturer's Instructions.
Do not leave children unattended.
Make sure that any harness is correctly fitted.
Do not use the high chair unless all components are correctly fitted and adjusted.
Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires,
gas fires etc. in the vicinity of the high chair.
Not to use the high chair if any part is broken, torn or missing.
Position the high chair away from solid structures and benches to avoid injuries caused by
falls and by access to dangerous items.
Use the high chair on a flat,even and horizontal floor and not to elevate the high chair on
any structure or table.
To reduce the risk of injury, advice shall be provided to position the high chair away from
furniture, walls, hot surface and liquids, window covering cords, and electrical cords and
position the high chair away from furniture when the chair is not being used at a table with a
tray removed.
Prevent serious injury or death from falls or sliding out.
Always use the restraint system.
The child should be secured in the high chair at all times by the restraining system,either in
the reclining or upright position. The tray is not designed to hold the child in the chair. It is
recommended that the high chair be used in the upright position only by children capable of
sitting upright unassisted.
Be sure the user familiar with the product instructions, and easy expand and collapse,not
use it by force.
To avoid danger of suffocation,remove plastic cover before using.This cover shall be de-
stroyed or kept away from babies and children.
Falling hazard: Prevent your child from climbing on the product.
Be aware of the risk of tilting when your child can push its feet against a table or any other
structure.
Keep children away when unfolding and folding the product to avoid injury.
The product is intended for children able to sit up unaided and up to 3 years or a maximum
weight of 15 kg
IMPORTANT
1. Do not expose the cradle to direct sunlight.
2. Soap may be used when cleaning all parts.
3. Always check that the replacement parts of the baby restraint device are properly locked.
If any part is loose or defective, the cradle must not be used until the defective parts are
replaced.