Creality CR-Laser Falcon Benutzerhandbuch Seite 12

Engrave/Cutting Thickness Of Basswood 1-3mm
Cutting Thickness Of Basswood 4-6mm
Cutting Thickness Of Basswood > 6mm
For better engraving effect, try to elevate the laser module as far away from the
workbench as possible on the premise that the focal length is correct.
The laser module must be installed and removed only when the power is off.
Software installation and usage guide
The machine supports real-time working by Type-C (LightBurn or LaserGRBL) and offline
working (LightBurn only).
Laser module
Multi-level fixed focus bar
2mm Basswood
12