Berbel BFB 7bT Gebrauchsanleitung Seite 122

Operation
3.2.1 Establishing the connection
- When working on the extractor
hood refer to the corresponding
instructions.
Perform the following steps in parallel on
the remote control and on the extractor
hood.
Remote control
1 Press and hold both buttons at the
same time (> 3 seconds) to start
the connection process.
The LED on the remote control flashes.
Extractor hoods
1 Press the pairing button within
2 minutes (< 1 second). The effect
lighting flashes blue for 2 minutes
(only BIH SKEP).
122
The remote control and extractor hood
are now connected by radio.
6006844_0 – 10.11.2023