Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NOTICE
Material damage.
►Before connecting the device, check
whether the mains voltage and mains
frequency of the device are identical to
those of the mains supply.
►Connect the power supply unit to an
easily accessible power outlet only af-
ter the product has been fully assem-
bled and after the final choice of loca-
tion has been made.
6.1 Connect, switch on and off the LED lighting
2
1
1. Connect the power cable to a suitable USB
power supply unit
2. Plug the power supply unit into a free, easily
accessible socket.
3. Press the On/Off switch [1] to switch on the LED
lighting.
4. Press the On/Off switch [1] again to switch off
the LED lighting.
6.2 Adjust brightness
►Press „+" [3] or „-" [3] to increase or decrease
the brightness of the lighting.
6.3 Change color temperature
►Press [2] to switch between the individual color
temperatures. You can switch between warm
white (3000K), neutral white (4500K) or cool
white (6500 K).
7. Store
NOTICE
Damage to the product due to incorrect
storage.
►Unplug the power supply unit from the
power outlet if it will not be used for a
long time.
►Protect the product from dust and mo-
isture.
►Store the product assembled and upright
or disassembled afterwards in a dark,
cool, dry and well-ventilated place.
►Do not place any objects on the pro-
3
duct because of deformations that
may occur.
8. Cleaning and maintenance
WARNING
Danger to life due to electric shock.
►Disconnect the power supply unit from the
power outlet before cleaning and before
transport.
►Do not clean the electronics with damp
cleaning agents.
CAUTION
Risk of injury and material damage.
►Do not stack other furniture on top of the
product.
NOTICE
Damage caused by incorrect cleaning
agents.
►Check the compatibility of the clea-
ning agent with the surface on an in-
conspicuous area.
►Use only cleaning cloths and soft brushes.
►Remove dust and light dirt with a damp cloth or a
soft brush.
►Use a mild, non-flammable and food-safe clea-
ning agent or a cloth dampened with water for
heavy soiling.Regular maintenance increases
the safety and longevity of your product.
►Check the attachment parts and screws regular-
ly for tightness and tighten the screws if necessary.
►Replace defective or damaged parts immediately.
EN
15
Werbung
