NORMBAU Cavere Care Gebrauchsanleitung Seite 10

Montagehinweise / Mounting information / Consigne de montage / Montagetip
Cavere Chrome Care
Abrasive sponges and scouring agents should not be used to clean our Cavere
Chrome products. We also advise against the use of cleaners containing solvent or
acid, limescale removers, vinegar and cleaning agents containing acetic acid.
The chrome surface can be cleaned using a little soap on a damp cloth. Limescale
stains can be avoided by drying the tap after every use. If limescale deposits still
build up, you can remove these using an environmentally friendly cleaning agent.
The appropriate cleaning agent should only be left on for a short time before being
rinsed thoroughly with water. In areas with hard water, it may be necessary to clean
the chrome surface at specific intervals. Please observe the following points when
cleaning:
 Residues from toiletries such as shampoo, shower gel or liquid soap should be
removed quickly as these can leave permanent stains.
 Harsh cleaning methods and aggressive cleaning agents can damage surfaces
and even penetrate the inside of the products.
Do not apply spray cleaners directly to the chrome surface. Spray the cleaning

agent onto a soft cloth and use this to wipe the surface instead.
 Use clean water to rinse the chrome surface thoroughly after cleaning.
Do not use any cleaning agents that contain hydrochloric acids, formic acids,

chlorine bleaching or acetic acids, as these can cause considerable damage.
Be sure to treat limescale stains and other types of soiling correctly. Any

damage caused as a result of improper treatment shall not be covered under
warranty.
More information about
maintenance and cleaning
Disposal
Disposal of the product and packaging is subject to the relevant national regulations
and must be disposed of in the prescribed manner.
2023-11-29 / 8214 415 / G |
10 von 28 NORMBAU