Factory Settings; System Update - Rt VOLKSBOX IDL 6650n: VOLKSBOX IDL 6651n Web-Edition Bedienungsanleitung

PIDs
Use this option to set the PIDs between automatic and manual. If you choose manual, you can set the individual
Audio and Video PIDs and the PCR.
Video PID
Use this option to manually set the Video PID.
Audio PID
Use this option to manually set the Audio PID.
PCR PID
Use this option to manually set the PCR PID.
Channels
• Select All to search for all Free-to-Air and encrypted channels.
• Select Free-to-air to search only for Free-to-air channels.
• Select HD+ to search channels on HD+'s bouquets only.
DVB-S2
Define whether searching shall cover DVB-S2 transponders as well.
Finding and storing the channels
Once the options are set, press the "Green" key on the remote control to start the channel search. Once a channel
search is started, a progress bar and list of channels found will be displayed. At any time, you may stop the search
by pressing Exit on the remote control. After the channel search is complete, press the "Green" function key on
the remote control to save the channel list and exit.

faCToRy SeTTIngS

Use this option to reset the receiver to default settings. This may be necessary when a large number of settings
have accidentally been made incorrectly, for example.
Factory Defaults
Press the "OK" key and confirm with the "Green"
function key, if you want to reset the unit to the
"Factory default" settings.
Note: Using this option will delete all data stored in
the channel lists, and favourite lists.
After this, the "Installation Wizard" will be open.
Please refer to the Installation Wizard section of this
user manual for further information.
Settings only
Use this option to reset only the user preferences and
settings, such as time and date. The channel lists will
remain unchanged.
Note: If the menu is not displayed clearly or in black and white, after changing the settings, it is because the Video
output mode was changed when you reset the unit to default settings. To correct this problem see chapter Audio/
Video Settings.
Preprogrammed Channel Lists
Use this option to reset your TV channel lists to the receiver's preprogrammed default program lists.

SySTem upDaTe

There are two ways to update the software of the digital receiver: Over The Antenna (OTA) and through the USB
port.
Software update via antenna (OTA)
If "Auto Upgrades" in the User Preferences is set to "Auto", the receiver will do this all in the background during
stand by. At the first start after such an update, the receiver will show you a popup message with the information,
that your receiver got a successful update.
During the OTA software update, the unit will first search for the update signal.
During the search, a message box "Software update" will be displayed on the TV screen – this process may take
several minutes. To stop this process, press the "Red" function key or "Exit" key. If new software is available,
17