Rt VOLKSBOX IDL 6650n: VOLKSBOX IDL 6651n Web-Edition Bedienungsanleitung Seite 12

Satellite
Use this option to select the satellite for which you
would like to set the position. Use the color keys on
the remote control, as shown at the bottom of the
screen, to delete or add a satellite from the satellite
list and set their individual settings.
LOF Low and High Band
The LOF (Local Oscillator Frequency) of the
LNB is usually printed on the LNB itself or in its
documentation. You can set the High and Low LOF
frequencies to match the LNB here.
Band switching
The receiver uses a 22kHz signal to control the band
of the LNB. If you do not know if your LNB supports
this feature, set the option to Auto.
DiSEqC type and DiSEqC input
You can connect up to two cascadable DiSEqC
switches to the receiver. This option allows you to set
the type and input port for each switch.
Reference transponder
This option allows you to set which transponder is
used as the reference.
Transponder number
Use this option to select a transponder from the built-
in transponder list. Once selected from the list, the
Frequency, Polarity and Symbol rate fields will be updated accordingly. Alternatively you can set these fields
manually.
Frequency
Set the frequency of the reference transponder.
Polarity
Set the polarity of the reference transponder.
Symbol rate
Set the symbol rate of the reference transponder.
Tuner IF and Channel ID (Unicable only)
This option allows you to select the Unicable Tuner IF
frequency (also known as User Band frequency) and
the channel ID for the receiver. In a typical Unicable
installation, you are able to connect multiple receivers
to a single LNB or Multiswitch output, with each
receiver set to connect to a different Unicable user
band and channel ID.
Signal strength and signal quality bars
In two level bar meters, on the right side of the screen,
the user can see the strength and quality of the signal
coming from the antenna dish to the tuners. These
two meters can be used while doing a fine-tuning of
the antenna position. The antenna has to be adjusted
to have maximum possible signal strength and signal
quality.
9