Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety
The ODB features double protection by thermal automatic fuses (10A for the 12V socket and
50A for the ANEN connector) and the BMS in the battery-pack. The fuses will automatically
activate when currents are too high and will reset automatically. Is is therefore not required to
replace or reset fuses.
The BMS protects the ODB battery pack and contributes towards a long service life. Functions of
the BMS are protection against deep discharge, overcharge, too high or too low temperatures,
high currents and cell balancing. When certain safety thresholds are exceeded, the battery pack
will shutdown as a precaution and will turn itself on when it operates within speciication. If
this does not happen automatically you need to disconnect your trolling engine and any other
equipment to reset the BMS. After a few minutes you can reconnect your equipment. The acti-
vation of the BMS may seem like a failure, but it is not. If it occurs repeatedly this can indicate a
malfunction of a component in your electrical system or overheating of the battery pack. If this
happens contact your installer to avoid injury or damage.
Warranty
Your ODB has a standard 2 year warranty from date of purchase. Other components (e.g.
charger, accessories) carry a 1 year warranty. Refer to our general terms and conditions for
detailed warranty conditions. Please retain and store your purchase receipt, as it is required for
warranty claims.
Werbung
