Rebelcell OUTDOORBOX 12.70 AV Bedienungsanleitung Seite 3

INTRODUCTION
Congratulations on the purchase of your Outdoorbox (model 12.35 AV, 12.50 AV or 12.70 AV).
The Outdoorbox (hereafter ODB) has been specially developed as portable energy source for
recreation, watersports and angling and is well suited for outdoor use and wet conditions.
The ODB comes with an integrated li-ion battery-pack with battery management system (BMS),
silicone wiring with automated thermal fuses, digital charge status indicator, blue ANEN connec-
tor, 12V cigarette plug connector. Also included: a separate USB charger and extra blue ANEN
connector.
SAFETY PRECAUTIONS AND WARNINGS
Your ODB has been engineered with a safe and long user life in mind. It is important to tho-
roughly review this instruction and follow the safety precautions. Not doing so may invalidate
the warranty and result in the malfunctioning of your ODB and further damage.
• Your ODB has been designed as a power source for recreation, watersports (including electric
boating) and angling but is explicitly NOT suitable to use as starter battery for internal
combustion engines (like in cars and outboards).
• Only use the blue ANEN connector to connect your trolling engine to the ODB.
NEVER connect your trolling engine to the 12V socket, it is not suitable!
• The ODB is waterproof according to the IP65 standard and is thus suitable for use in rainy
conditions. Please ensure that the ODB is completely closed and there is no dirt in between
the top and bottom parts of the ODB. Also ensure that the 12V power socket is never fully
immersed in water! This socket is splash waterproof if fully closed but cannot be fully
immersed in water.
• When used outside the permitted standards (e.g. high load) your ODB will automatically turn
of. No power will be available until the ODB can operate within standards.
• Avoid damaging the ODB by dropping it. In case of external damage do not use your ODB but
have Rebelcell check for proper and safe operation.
• Place the ODB in the coolest environment possible. Do not expose the ODB to sources of
direct heat such as (open) ire, heating or exposure to direct sunlight for extended periods of
time. Long- term use in high temperatures (> 40° C) has a negative inluence on service life.
At a temperature of 55° C the ODB will shut down until a normal operating temperature is
reached.
• The ODB is classiied as dangerous goods for transportation purposes (ADR Class 9). Review
the Material Safety Data Sheet (MSDS) on our website for more information.
• The battery-pack (including wires and fuses) is situated below the coverplate in the ODB.
Never remove the coverplate! This can be dangerous and will automatically void the
warranty.
INSTALLATION AND USE
• Trolling engine: connect the 2 silver-colored pins (by soldering or crimping with a AMP
crimping tool) to the trolling engine cables and click into place in the blue ANEN plug. You can
now easily connect your trolling engine to the blue connector on the ODB.
• Depth sounder: connect your depth sounder with a cigarette lighter plug to the 12V socket
(like with the Quick Connect FF ODB cable)