Setup - Danfoss 088U0220 Anleitung

Instruction CF-RC Remote Controller
Setback temperature
In the Setback program (see 5.2.2), activate the Setback temperature
menu to set the room temperature reduction from 1 to 10°C during
setback periods.

5.3 Setup

From the start-up screen, activate the:
Setup menu with access to a variety of information and setting possi-
bilities for the Remote Controller as well as the entire CF2 system.
Note: As some of the setting possibilities in the Setup menu can a ect the
con guration of the CF2 system, and thus also the functioning of the entire
application in general, they should be handled with caution
Languages:
Here you can choose another language than the one selected during
the installation process (see 2).
Date and time:
Provides access to the setting of the date and time. Furthermore, this
menu includes the settings for and activation of the summertime pro-
gram. This enables you to con gure at what day, week and month the
summertime begins and ends.
16
VI.UH.M2.52
Menu
Setup
Produced by Danfoss Floor Heating Hydronics 09.2005